SEAFARER Hooded - FZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm Hooded is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER Cap 3mm
Protecting your head is key to a good session, but also in the long term to prevent “surfer’s ear”. Hoods are often not the most adapted tools for wind sports, as they can be kind of restrictive when you are always looking right or left. Caps do not cover the neck, and thus allow a better freedom of movement. They are great for the colder wing foiling and kiting days. The Seafarer Cap is a light and comfortable thermal protection that will save you from brain freeze on these chilly days. - Designed in 3D - X10D Jersey
SEAFARER - FZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - FZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - FZ 3,2mm
The new SEAFARER 3.2mm is a high-quality summer wetsuit that is built with the same materials as a winter wetsuit, making it a perfect choice for these chilly mid-season days. This wetsuit features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - BZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Back Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
Offshore vest
The OFFSHORE is made for those who spend their day out there. It allows you to carry water, a tool, your phone, a snack, safety equipment and much more thanks to its practical and accessible pockets. Its fit is inspired by trail running vests, hence maintaining a great freedom of movement and mobility of the upper body once at sea. The OFFSHORE takes up as little space as possible on the water, while still being able to carry a maximum number of accessories, including a wing! Indeed, thanks to its two external straps, it allows you to deflate in total comfort. Once you've reached your starting point, sit on your board, fold the wing, open the two straps, and compress the wing outside the bag. What's more, the often-flashy colors of the wings make you even more visible from afar. We advise you to use the WING PADDLE ATTACHMENTS we've developed, so that you can secure your paddle along the central strut of your wing. The OFFSHORE bag has paddle attachments, but having the paddle in the wing is much more comfortable. A word about “deflating”: SUP foil downwind is becoming increasingly popular, but the logistics of a downwinder are complicated. Riding upwind with a wing, deflating, and then paddling out is much more practical: no car, possibility of choosing the length of your DW, etc. MANERA has therefore decided to create a light, practical vest adapted to this sport: the OFFSHORE. Note related to SUP foil downwinding: There are handy, mini hand pumps that can re-inflate a wing in just a few minutes, up to 6-7 PSI. These pumps can be a safety feature in case of difficulty (e.g. inability to take-off). They fit in the OFFSHORE's pocket, and we've designed a nozzle to adapt these pumps to F-ONE wings’ valves. Download the file HERE and have the part printed by your local 3D printer. *Disclaimer: Downwinding require physical preparation, proper security devices, and assistance at sea. Please do not attempt any downwinders alone or without proper training. - Backpack - Hydratation bag - Integrated flashlight - Whistle buckle - Front pockets - Deflator straps - Paddle attachments Deflator straps : Deflating has never been so easy! Thanks to its two external straps, the Offshore vest allows you to deflate in total comfort: fold the wing, open the two straps, and compress the wing outside the bag. Integrated flashlight : Inspired by trail running vests, using light and resistant materials, the OFFSHORE is made to be forgotten. Backpack - Hydratation bag The outside pocket has a compartment for a hydration pack and a large pocket ready for your belongings. (The hydratation bag is not included with the offshore.) Low profile, lightweight, fitted : Inspired by trail running vests, using light and resistant materials, the OFFSHORE is made to be forgotten. Whistle buckle : The chest release buckle features an integrated safety whistle, which may come in handy if you ever need to be heard or call for help at sea. Front pockets : Keep your phone and VHF radio close at hand, on your chest. Paddle attachment : We recommend attaching the paddle along the central strut of the wing, but it's perfectly possible to have it on your back as in a "quiver" thanks to the two straps. Leash attachments : The vest features a multitude of leash attachments to secure caps, bucket hats, glasses, phones and other accessories. Hand pump connector : The hand pump connector is a tip/connector used to connect the valve of your wing with a standard balloon pump. This allows you to carry a compact pump in a bag, which you can use if you need to re-inflate your Wing, during a downwind.*The Connector is not included in the OFFSHORE vest. For commercial reasons, we did not produce this connector. But we still wanted everyone to be able to access the design and have it 3D-printed at home, so you'll find a link below to download the ready-to-print design.
MEN X10D Hooded - FZ 4,3mm
Best of both worlds, the 4.3mm X10D allows unrestricted movements while keeping you warm during mid-season. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great comfort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
MEN X10D - FZ 5,4,3mm
Get the ultimate warmth from a light and flexible wetsuit! This is our newschool guys favorite for winter sessions. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great confort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
MEN X10D - FZ 3,2mm
Get the ultimate warmth from a light and flexible wetsuit! This is our newschool guys favorite for winter sessions. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great confort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
MEN T-shirts
We make sure to produce simple yet well built tee-shirts. We’re not an apparel company and will never be, this collection is mostly intended to MANERA lovers. In order to offer a less harmful product for the environment, we only develop a small apparel collection each year. They are assembled by our partner in Mauritius island in a local cotton fabric. Made in 100% Organic Cotton / Hangtag and packaging are also recycled. Fit : Basic Composition : 100% Organic Cotton
MAGMA Women Hooded - FZ 6,4mm
The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Women Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Women - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Open palm 2,5mm
Put an end to windy winter sessions and tetanized forearms! Kiting, wing foiling or windsurfing in cold weather is not easy, and the use of conventional neoprene gloves quickly causes your forearms to tense up, drastically shortening your sessions. MANERA's Open Palm gloves insulate your hands from the wind and cold with their glide-skin on the outside and MAGMA+ fleece on the inside. They still maintain a natural, easy grip and direct contact with the bar, handles, or boom. They keep your hands warm and your arms comfortable, even in the middle of winter. - Open palm - Glide skin - Magma + fleece Magma Plus : Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast. Open Palm : Open hand palm for a better grip, thus avoiding muscle tetanization. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted gloves in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA gloves stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Hooded - FZ 6,4mm
The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Hood 2mm
The MAGMA hood features a double flap: One stays outside the wetsuit collar while the other one comes inside. It creates a double barrier against water flushing and it makes sure the hood stays in place. We have used our Reflex-skin jersey to line the areas where we need mobility: Neck, face, chin. Head and ears are built in Glide-skin neoprene which is waterproof & windproof to fight the wind-chill effect. The inside is lined with our MAGMA PLUS for an unbeatable warmth and fast-drying. It’s the weapon of choice if you want to spend the winter without brain-freeze while still having a good mobility. Update: From the FW24 collection onward, all our hoods have been updated to have a bigger face opening. It provides more comfort and makes sure you can wear the hood under the chin without being too squeezed. - Magma Plus - Designed in 3D - Update Magma Plus : Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Glove 2,5mm
The MAGMA LOBSTER gloves exist in 2.5mm and 5mm. These are made for really cold days, and for people prioritizing warmth over freedom of movement. The MANERA team has been working on glove designs for two winters now, trying to provide the best comfort-to-warmth ratio possible. After testing different types of patterns, we came up with the LOBSTER as the best one. Featuring less useless fabric and stitching than a classic design, the LOBSTER gloves are light and comfortable. Because most fingers stay together, you will feel much warmer than with traditional gloves. The separated thumb and index give a great grip and handling. This new design will have you happy to bring the gloves out when winter kicks in! - Magma Plus - Light & comfortable - Warm - Good Grip & Handling Magma Plus Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast.
MAGMA Cap 2mm
Protecting your head is key to a good session, but also in the long term to prevent “surfer’s ear”. Hoods are often not the most adapted tools for wind sports, as they can be kind of restrictive when you are always looking right or left. Caps do not cover the neck, and thus allow a better freedom of movement. They are great for the colder wing foiling and kiting days. The Magma Cap features glide skin to cut the wind chill, and Magma+ Fleece on the inside for warmth and fast drying. This is the ultimate accessory for cold and windy days. - Designed in 3D - Magma Plus Magma Plus : Our MAGMA material is one of the warmest on the market. Besides, it is highly stretchable, which brings an unmatched freedom of movement to the suits. Its plush loops work as effective insulators and heat generators while providing a smooth and soft feeling that makes the suit incredibly comfortable. It also dries extremely fast. DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Baselayer Hooded 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - Magma hood - 2mm - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Baselayer 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA - FZ 4,3mm
The MAGMA 4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.