SEAFARER - FZ 4,3mm
The go-to wetsuit: Reliable from mid-season to early winter, the new SEAFARER 4.3mm is probably the wetsuit you’ll use most often all year round. The arms and shoulders are built in 3mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - FZ 3,2mm
The new SEAFARER 3.2mm is a high-quality summer wetsuit that is built with the same materials as a winter wetsuit, making it a perfect choice for these chilly mid-season days. This wetsuit features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Front Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
SEAFARER - BZ 5,4,3mm
The new SEAFARER 5.4.3 will provide everything you’re looking for in a reliable winter partner. The arms and shoulders are built in 4mm to offer more stretch on the upper body, while the new, fast-drying fleece provides good thermal insulation in the back. This new SEAFARER also features SD2 TAPE in the most critical areas. This tape is applied inside the wetsuit over the seams to make sure these are waterproof and durable. The SEAFARER brings us back to the essentials of what makes a good wetsuit, nothing more, nothing less: warmth, comfort, durability. It's a no-bullshit wetsuit with MANERA’s renowned fit and construction. If you are looking for a high-quality winter wetsuit with the best value for money, the SEAFARER is made for you. - Back Zip - X10D fleece Plus - SD2 TAPE 2.0 DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER : The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort.
MEN X10D Hooded - FZ 4,3mm
Best of both worlds, the 4.3mm X10D allows unrestricted movements while keeping you warm during mid-season. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great comfort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
MEN X10D - FZ 5,4,3mm
Get the ultimate warmth from a light and flexible wetsuit! This is our newschool guys favorite for winter sessions. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great confort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
MEN X10D - FZ 3,2mm
Get the ultimate warmth from a light and flexible wetsuit! This is our newschool guys favorite for winter sessions. The X10D is the ultimate performance wetsuit. In addition to excellent thermal protection, the X10D fleece interior gives flexibility and lightness while providing great confort. It is perfectly adapted to any discipline where you need maximum flex because of its ability to follow the body’s movements. If you are looking for lightness and freedom of movement, this is the wetsuit you need. - Front Zip - X10D fleece Plus - SD2 Tape 2.0 - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable. Sealing prints : Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place. Strategic structure : Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including: . Avoiding seams in tensions area, to maximize flexibility and strength. . Making sure the seams are stretched vertically and not sideways. . Removing seams from friction areas, which avoids rash and increases stretch capacity. . Reinforcing strategic parts and panels right where it needs to be. Fusion cut : The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it. SD2 tape 2.0 : The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits. Triplex SEAFARER The Triplex SEAFARER is designed to be reliable and efficient. Re-flex skin / Protection S-foam / Insulation X10D + / Warmth & flexibility These three materials brought together provide everything you need in a good wetsuit: Warmth, flex, comfort. X10D Fleece Plus X10D Jersey S-foam RE-flex skin
MEN T-shirts
We make sure to produce simple yet well built tee-shirts. We’re not an apparel company and will never be, this collection is mostly intended to MANERA lovers. In order to offer a less harmful product for the environment, we only develop a small apparel collection each year. They are assembled by our partner in Mauritius island in a local cotton fabric. Made in 100% Organic Cotton / Hangtag and packaging are also recycled. Fit : Basic Composition : 100% Organic Cotton
MAGMA Women Hooded - FZ 6,4mm
The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Women Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Women - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Hooded - FZ 6,4mm
The Magma Hooded is the northern warriors' best friend. Featuring a 2mm windproof Magma hood attached to a 6.4mm Magma suit, you can hit the spot all year round even in the worst conditions. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there. Not only does its fleece work as an effective insulator and heat generator, but it is also manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece. You’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Hooded - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted hood in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA hood stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Baselayer Hooded 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. The 2mm hooded version provides a great water tight set-up, and a better hold than a classic hood. - Magma hood - 2mm - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA Baselayer 0,5mm
The BASELAYER function is to provide added warmth to your existing wetsuit, by adding an extra neoprene thickness. - Magma Plus - 0.5mm - Designed in 3D DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA - FZ 5,4,3mm
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
MAGMA - FZ 4,3mm
The MAGMA 4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden. The Magma is built for the cold and windy winter days. The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again. It is the wetsuit of your choice if you don’t want to stay home during winter sessions. - Front Zip - Magma fleece Plus - SD2 Tape 2.0 - Back knee emboss - Water strainer DESIGNED IN 3D When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory. It creates a natural, second-skin fit that makes the MANERA wetsuits stand out. - A GOOD FIT MEANS EVERYTHING - Warmth: No water entry, no air pocket. Durability: The neoprene is only stretched when moving. Comfort: No over tight areas, comfortable armpits/crotch. Style: Folds will never be fashionable.
HALO harness V2
The HALO 2.0 continues to offer our breakthrough "Adaptive Shell" technology, all in a harness you can trust. Following the recall concerning these parts, the “Adaptive skin”, “Pivot Inter” and “Pivot Exter” have been redesigned to provide a much higher resistance without compromising comfort. With your safety as our priority, thorough testing has been conducted at the factory, in the water, and inside our office’s lab, under the same protocol as for the Quick-Release ISO norm. In Halo 2.0 you'll find the two basic principles of our Halo range: The Softshell The softshell provides perfect adaptability to the user's body type and movements. But it becomes distorted under the pressure of the kite: The user's sides are compressed. It therefore has good adaptability, but little hold. The Hardshell The hardshell does not become distorted under the pressure of the kite: The user's sides are not compressed. But it has no adaptability to the user's body type and movements. It therefore has a very good hold, but little adaptability. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. - Adaptive skin - Hardshell - Softshell - Arc spreaderbar Adaptive shell : Our Research and Development approach is to create the best possible product, so we have sought to use the advantages of the two current technologies while eliminating their faults. This is how the “Adaptive Shell” was born. This patented technology is made up of two main parts: The Adaptive skin and the Hardshell. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support. Adaptive skin : The Adaptive skin is a support skin made of a flexible material providing the user maximum adaptability and freedom of movement. It is directly in contact with the body; its function is to provide comfort. Hardshell : The Hardshell is a rigid arc; it prevents the harness from bending and thus compressing the user's body under the strong pressure of the kite. It is not in contact with the user nor with the back of the Adaptive skin; its function is to manage the mechanical pressure that the harness receives. Durability : A product is as durable as the least durable part of its components. The different components of a harness are often non-replaceable (sewn straps, glued foams, etc.) and certainly not recyclable. Therefore, sometimes a worn or damaged part forces you to throw away the entire product. In an effort to reduce our carbon footprint and in order to provide better customer service, all HALO components are assembled without glue or seams so that each part is easily replaceable. We stock spare parts and are able to replace each of them. The ARC spreaderbar, the sliding rope, and the kitenife are included with purchase. Direct contact : Thanks to our Adaptive shell technology, and in particular the very adaptable Skin part, there is no longer a need to use large, thick foam for comfort. The HALO's ultra-thin neoprene foam provides several advantages over a conventional harness: . A more direct feeling . Less bulky contact . Lighter, even when in the water Fitting : In order to optimize the customer experience, we have added two sizes: S+ and M+. These two new sizes are in fact the standard S and M harnesses equipped with longer spreaderbars. Why? Bodies may assume different shapes: . A more rounded shape (someone with a big belly) . A more oval shape (someone with wide hips). For the same waist size, we therefore have two completely different body types. By incorporating longer spreaderbars, sizes S+ and M+ are more suitable for people with wider hips. Leash attachement : Our kite leash attachment point is located towards the front of the harness, allowing easy and direct access for release in case of an emergency. Attached to the straps on the right-hand side by default, the metal ring can easily be moved to the left straps. W A R N I N G : NAISH leashes are not adapted to the size of our metal ring, and it could present a safety hazard during release. We are currently working on a new version of the ring. Arc spreaderbar : The ARC is a new generation spreaderbar developed to offer a more precise, comfortable navigation experience, with a harness that is better held in place.
Fleece
Built in 100% recycled sherpa polyester, the MANERA fleece provides warmth and comfort before and after your sessions. This new fleece features a front full-length zipper, side pockets and a chest zippered pocket for convenient storage. Composition : Fleece : 100% recycled polyester Chest pocket : 94% recycled polyester & 6% elastane.
EXO harness
It is difficult to improve a harness like the EXO, but the development of the ECLIPSE has taught us a lot and we have used this experience to redesign our star harness. We applied Adaptive Shell Technology to the EXO model to provide better support, reduced weight and increased durability. Thanks to a stiffer center area, the EXO perfectly supports the back. However, it allows greater freedom of movement thanks to its different levels of rigidity, especially its flexible outline. The soft part of the EXO is built in one “Single foam”. The single foam doesn’t absorb any water, so the harness stays light and comfy once in use. The harness comes with a standard hook, a rope and a knife. - Adaptive shell - Single foam - Tuck flap Adaptive shell : The Adaptive Shell stiffness shades from hard in the center area to softer on the edges. The stiff center-belt prevents the harness from folding and compressing your body while preserving a good lumbar support. The softer outline preserves intuitive mobility and adaptability. It results in a shell that is forgiving where you need flex and stiff where you want support. Single foam : Comfort is paramount in any harness; the UNION uses a single injection mould to make a one-piece foam backing. This makes it exceedingly durable, as there are less parts to be glued or stitched together. It absorbs far less water and is much lighter than the multiple foam layups used in some harnesses. Down hold system : Because there’s nothing worse than a harness that rides up during your sessions, we developed the DOWN HOLD SYSTEM, an asymmetrical attachment that distributes the forces downward. Secured in its original position, the hook does not ride back up. Tuck flap : The TUCK FLAPS further assist the DOWN HOLD SYSTEM using the flaps positioned on the ends of the spreader bar and inserted into the harness. Once the straps are tightened, they are compressed and locked. By stiffening the connection between the harness and the buckle, they prevent it from riding up. Leash attachement : Our kite leash attachment point is located towards the front of the harness, allowing easy and direct access for release in case of an emergency. Attached to the straps on the right-hand side by default, the metal ring can easily be moved to the left straps. W A R N I N G : NAISH leashes are not adapted to the size of our metal ring, and it could present a safety hazard during release. We are currently working on a new version of the ring. Arc spreaderbar : The ARC is a new generation spreaderbar developed to offer a more precise, comfortable navigation experience, with a harness that is better held in place.
ECLIPSE harness
Having worked on ergonomic designs for a while, our goal was to push our frame concept to more stiffness, allowing a better support of the back & a lower fit. But something 100% hard was not an option: Our back needs some adaptability & human morphology is unique. So here comes the ECLIPSE, a skilful balance between stiffness & flex that brings support where you need it and the freedom to move the way you want. The harness comes with a standard hook, a rope and a knife. - Adaptive shell - Gel foam - Tuck flap
ALT Meteor - FZ 5,4,3mm
ALT stands for « Alternative ». We have built a greener alternative to conventional wetsuits, with performance in mind. It features a 100% natural YULEX rubber. Unlike finite resources like oil and limestone, natural rubber is a renewable resource. Directly tapped from FSC-certified hevea forests without cutting them down, it ensures a long-term supply stability as well as a drastically reduced environmental impact. Both inside and outside jerseys as well as our inside fleece are recycled, and the wetsuit features all our other standard sustainable processes. The performances of the ALT are close to a MAGMA’s. We believe the ALT represents a new generation of high-performance wetsuits that has a more reasonable impact on the planet. - Front Zip - Yulex Pure® - SD2 Tape 2.0 - Back knee emboss - Water strainer
ALT Meteor - FZ 4,3mm
ALT stands for « Alternative ». We have built a greener alternative to conventional wetsuits, with performance in mind. It features a 100% natural YULEX rubber. Unlike finite resources like oil and limestone, natural rubber is a renewable resource. Directly tapped from FSC-certified hevea forests without cutting them down, it ensures a long-term supply stability as well as a drastically reduced environmental impact. Both inside and outside jerseys as well as our inside fleece are recycled, and the wetsuit features all our other standard sustainable processes. The performances of the ALT are close to a MAGMA’s. We believe the ALT represents a new generation of high-performance wetsuits that has a more reasonable impact on the planet. - Front Zip - Yulex Pure® - SD2 Tape 2.0 - Back knee emboss - Water strainer